11al/18al/08al/F11/F18 Bullut Shell Special Carbon Alloy Steel Cartridge Case Steel

Basic Info

Model NO.	F11/F18
Technique	Cold Rolled or Hot Rolled
Application	Cartridge Case
Special Use	Cutting Tools, Cutters in Common Steel, High-strength Steel Plate, Wear Resistant Steel
Stock	Stock
Transport Package	Wooden Support or Wooden Box
Specification	thickness 0.5mm-30mm
Trademark	Estar
Origin	Ningbo
HS Code	7225409900
Production Capacity	10000tons/Years

Product Description

Table 1:

Card number	Code name	Chemical into Points,%
		C	Si	Mn	P	S	Cr	Ni	Cu	Als
11Al	F11	≤0.11	≤0.06	0.30-0.55	≤0.030	≤0.030	≤0.15	≤0.30	≤0.20	0.02-0.10
18Al	F18	0.11-0.19	≤0.06	0.35-0.55	≤0.030	≤0.030	≤0.15	≤0.30	≤0.20	0.02-0.10

When the carbon content of 18A1 is 0.13% ~0.19%, the lower limit of 0.30% and the maximum limit of 0.60% when the carbon content is less than or equal to 0.12%.Table 2:

Set.	Table 2
Card	Codena	Sample heat treatment	At the tensile	elongation gas,%
11Al	F11	920 ±20X3	295~390	>28
18Al	F18	Heat insulation 30min, air cooling	345~440	>26

Table 3:

Thick Degree	Width Degree	Seat length
Public name size	Public name size	Public name size
1-30mm	50-1500	455-2000

Remarks: Tape delivery is available for thicknesses up to 15mmEquipment and workshop